(c) Steve Parker, 17 Oct 2002 - 2005 (http://steve-parker.org)
speedtouchconf comes with ABSOLUTELY NO WARRANTY; for details type:
./speedtouchconf.sh -gpl
This is free software, and you are welcome to redistribute it
under certain conditions.
See the included file COPYING for more details.
************************************************
* *
* speedtouchconf.sh by Steve Parker *
* *
* http://speedtouchconf.sourceforge.net/ *
* based on speedtouch.sourceforge.net project *
* *
************************************************
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and (possibly) /var/log/messages for diagnosis.
Linux kernel version 2.6 okay.
*******************************************
* *
* Please select your ISP Settings *
* *
*******************************************
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, Wanadoo 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
Austria (AON) 8 48
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
8 35
Please enter your ISP Login ID (eg another@hg1.btinternet.com)
adslppp@telefonicanetpa
Please enter your ISP Password
adslppp
Settings:
VPI / VCI : 8 / 35
Login : adslppp@telefonicanetpa
Password : adslppp
Are these correct? (Y/N)
Y
No further user interaction is required.
Configuring SpeedTouch Driver...
Software Configuration - SUCCESS
Building SpeedTouch Driver...
Software Build - SUCCESS
Installing SpeedTouch Driver...
Software Installation - SUCCESS
Creating ppp files in /etc/ppp
You can ignore any insmod hints here...
*** Configuration finished. Starting the connection ***
ds feb 17 10:14:13 CET 2007
The modem lights should start flashing for approx. 60 seconds...
You might see some messages about USBDEVFS_BULK failed - you can ignore this.
Feb 17 10:14:15 (none) kernel: usb 1-2: bulk timeout on ep5in
Feb 17 10:14:15 (none) kernel: usbfs: USBDEVFS_BULK failed dev 4 ep 0x85 len 512 ret -110
ds feb 17 10:15:01 CET 2007
The lights should both be solid green now.
Feb 17 10:15:01 (none) modem_run[10695]: ADSL synchronization has been obtained
Feb 17 10:15:01 (none) modem_run[10695]: ADSL line is up (1024 kbit/s down | 320 kbit/s up)
Running : /usr/sbin/pppd call adsl
Called pppd - you should see some messages about IP addresses now...
Feb 17 10:15:11 (none) pppd[10783]: pppd 2.4.2 started by root, uid 0
Feb 17 10:15:11 (none) pppoa3[10784]: pppoa3 version 1.3.1 started by root (uid 0)
Feb 17 10:15:11 (none) pppoa3[10784]: Control thread ready
Feb 17 10:15:11 (none) pppd[10783]: using channel 1
Feb 17 10:15:11 (none) pppoa3[10784]: host --> pppoa3 --> modem stream ready
Feb 17 10:15:11 (none) pppoa3[10784]: modem --> pppoa3 --> host stream ready
Feb 17 10:15:11 (none) pppd[10783]: Using interface ppp0
Feb 17 10:15:11 (none) pppd[10783]: Connect: ppp0 <--> /dev/pts/2
Feb 17 10:15:12 (none) pppd[10783]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xdc65b405>]
Feb 17 10:15:39 (none) last message repeated 9 times
Feb 17 10:15:42 (none) pppd[10783]: LCP: timeout sending Config-Requests
Feb 17 10:15:42 (none) pppd[10783]: Connection terminated.
Feb 17 10:15:42 (none) pppoa3[10784]: Error reading from source device
Feb 17 10:15:42 (none) pppoa3[10784]: Woken by a sem_post event -> Exiting
Feb 17 10:15:42 (none) pppoa3[10784]: Write to usb Canceled
Feb 17 10:15:42 (none) pppoa3[10784]: Exiting
Feb 17 10:15:42 (none) pppd[10783]: using channel 2
Feb 17 10:15:42 (none) pppd[10783]: Using interface ppp0
Feb 17 10:15:42 (none) pppd[10783]: Connect: ppp0 <--> /dev/pts/3
Feb 17 10:15:42 (none) pppd[10783]: Script /usr/local/sbin/pppoa3 -e 1 -m -1 -c -vpi 8 -vci 35 finished (pid 10784), status = 0xff
Feb 17 10:15:42 (none) pppoa3[10836]: pppoa3 version 1.3.1 started by root (uid 0)
Feb 17 10:15:42 (none) pppoa3[10836]: Control thread ready
Feb 17 10:15:42 (none) pppoa3[10836]: host --> pppoa3 --> modem stream ready
Feb 17 10:15:42 (none) pppoa3[10836]: modem --> pppoa3 --> host stream ready
Feb 17 10:15:43 (none) pppd[10783]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xc99c4049>]
*********************************
* Don't seem to have connected. *
*********************************
Please check the username and password in /etc/ppp/*-secrets.
Also check the VPI/VCI in /etc/ppp/peers/adsl
You could try removing the following files first:
/var/run/ppp0.pid
Then run /etc/init.d/speedtouch start
Current settings: adslppp@telefonicanetpa / adslppp / 8 / 35
(none):~/Desktop/InstalLinux1 #